Detailed Product Description

ADL 3106 Injection Molding Silicone Rubber

Model No.:ADL3106serious

1.Application:

This product is high tensile injection mold RTV2 liquid silicone rubber.It is suitable for cook,orings, rubber covered roller,keypad, rubber wares and other silicone rubber products.
2.Features:

ADL3106 serious has excellent elasticity and properties of anti-aging and resistence to high temperature afer curing under certain temperature(the temperature can be adjusted according to different demand).It has low linear shrinkage,resistence to impact fatigue,good thermal stability and cold resistence(the operating temperature is 60250).Below 20 ,the safe operating time in a sealed state after component A and B being mixed is 2 days.When the temperature becomes higher,the operating time will be shortened.

3.Technical parameters:

4.Usage:

Measurement: Be exact Metage for A and B components.

Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it should not be  pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.

Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.

5.Precautions:

1 Mixing  A&B compenent equably before using.

2The mixed material should be in sealed storage and be used up during the safety operation,or itll  slowly cure to wastage

3It has the  connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.

4Its non-dangerous goods.But pls dont have it  touch mouth or eyes .If it happens,pls flushing yourself quickiy with enough rinsing.

5This product should be avoided being mixed with another kind of organic tin catalyst such as amines, sulfur, phosphorus compounds and some metal salts.Otherwise,the catalyst of this product will be useless that the mixed material will not be cured.

6.Package:

Specification:40kg/set(A20 kgB20 kg); 400kg/setA200 kgB200 kg

7.Storage and Transportation:

Keep in dry place, the shelf time is nine months(Below 25)

Its the non-dangerous goods, and it should be transported as the common  chemicals.